Alyssa Rosenheck Style and design: Mel Bean + Bailey Austin

Up for a astonishingly easy weekend task? Believe that it or not, you can make your very own banquette out of stock kitchen area cupboards, a couple of two-by-fours, and a comfortable cushion. Complete the appear with an assortment of graphic and sound-colored throw pillows.

See underneath for action-by-action directions from Allie Mann of Situation Architects & Remodelers to get commenced on your banquette.


Elements Desired

  • Degree
  • Velocity square
  • Measuring tape
  • Pencil
  • Nail or screw gun with trim nails or trim screws
  • 2×4 lumber product (sum will depend on the size of the banquette)
  • 1×4 lumber product (sum will depend on the size of the banquette)
  • 1×2 lumber product (sum will depend on the size of the banquette)
  • Window sill product
  • ¼” thick birch plywood
  • ¾” thick birch plywood
  • Building glue
  • Circular noticed
  • Inventory wall cupboards, 12” tall and 12” deep, width dependent on house.

    How to Establish the Banquette

    • Ascertain wished-for size of banquette seating (stock cupboards arrive in 3” increments, so if you intend to use the banquette for storage, maintain this in brain). The cupboards should really not sit restricted wall-to-wall. There should really be a filler or piece of trim in between the box of the cabinet and the wall to allow for the doorway to open.
    • Body the platform of the bench using the 2×4 lumber product.
    • Body a knee wall or partial wall at cabinet height to attach the cabinet using the 2×4 lumber product.
    • Safe bench frame to wall, alongside with knee wall and cabinetry, using nail or screw gun.
    • Minimize the ¼ ” birch plywood on circular noticed to wrap the toe kick house (this will be painted later).
    • Minimize the ¾” birch plywood on the circular noticed for the wooden leading. When measuring the plywood leading, allow a ¾” overhang in entrance of the cabinet doorway this would be a one.5” overhang from the genuine cabinet box.

      How to Establish the Banquette Wall Trim

      • Future, evaluate, minimize, and use a piece of ¼ birch plywood to the wall—the length of the bench—using your complete screws and glue. The piece of plywood and bench with each other should really complete 48” tall previously mentioned the complete floor, earning the plywood piece close to 30– 32” tall.
      • Future, use a 1×4 horizontal piece to create the rectangular box previously mentioned the bench at the leading and bottom of the plywood piece.
      • Evaluate, minimize, area, and attach the 1×4 vertical components on the plywood with screw or nail gun. Be absolutely sure the wainscot rectangles mimic the exact same width as those people on the bench cabinet if possible. These rectangles you are making on the wall will possible be in between 18” – 24” wide.
      • Complete leading of the wainscot rectangle with the window sill trim product or the 1×2 lumbar (measured, minimize, and nailed in area).
      • Caulk and putty any seams, gaps, fill holes, etcetera.
      • Sand, key, and paint the plywood.

        A version of this element appeared in the July/August 2020 problem of Very good Housekeeping.

        This material is produced and maintained by a third get together, and imported on to this page to assistance end users provide their email addresses. You may perhaps be equipped to obtain far more information about this and very similar material at piano.io

        This commenting segment is produced and maintained by a third get together, and imported on to this page. You may perhaps be equipped to obtain far more information on their net web site.