Table of Contents
Make a cubby storage toy organizer from just one sheet of plywood! This Diy stacked toy cubby with dividers is best storage for toys, craft provides, or whichever you need to organize in a child’s area, play area, or nursery.
Our entry desk with cubby storage is one more great kid-friendly cubby storage strategy. See extra Diy toy storage thoughts in 50 Wise Toy Storage Solutions and 25 Enjoyable Toy Storage Suggestions.

Diy Cubby Storage Toy Organizer
Developed by Amanda from Sincerely Marie Types Ideas by Remodelaholic
Initial highlighted in Amanda’s boy’s area makeover below.
This write-up includes affiliate hyperlinks. Master extra and examine our complete disclosure policy below.
We obtained a toy box around a 12 months ago but I rapidly discovered that it was extra of a black gap than nearly anything else. Apart from getting massive and dim, my son would throw half of the toys out ahead of he discovered what he was hunting for. Right after I experienced ultimately experienced enough, I started off seeking for toy organizers on the web.
I discovered one from Land of Nod and loved it! One particular thing I did not like was the price tag. $199 for one bin . . . ouch! J and I realized we could make it on our individual for way a lot less and we did. We were not able to discover plans for just what we wished. It took us a 7 days or two to hammer out the plans. Listed here they are!
We built the toy bins from one 4×8 – 3/4″ sheet of plywood. We applied a independent one/4″ sheet that we currently experienced for the backing. When set alongside one another, the toy cubby steps 36″ x 14 3/4″ x 32″.
How to Make a Diy Cubby Storage Toy Organizer
Instruments Wanted:
Elements Wanted:
- 3/4″ Sheet of plywood
- one/4″ Sheet of plywood*
- two – 1½″ Pocket gap screws
- 1¼″ Pocket gap screws
- Wooden glue
- Sand paper
- 1¼“Brad nails
- Paint/Primer or Stain of alternative
Complete materials searching listing and minimize diagrams are involved in the PDF toy cubby storage plans below.
Action one: Minimize Parts & Drill Pocket Holes
Minimize out the cubby items as indicated in in the toy organizer woodworking plan, such as the mitered edges. Drill pocket holes as indicated in the plans.
Action two: Assemble Individual Cubbies
Employing pocket holes and wooden glue, assemble 3 cubby sections.
Action 3: Put in Dividers
Evaluate and mark the divider locations, then nail in place.
Action four: Stack and Add Backing
Stack the 3 cubby sections. Minimize a sheet of plywood to the right dimension and screwed it onto the back. This will hold just about every shelf in place. To be equipped to stack and unstack the cubbies, minimize person backing items for just about every cubby section.
Action 5: Finishing the Cubby Storage Cabinets
I selected a paint colour named Major Gray by Sherwin Williams. We allow it dry overnight and moved it into place the following working day.
Extra cubby storage you can establish:
