Do you want to update the appear of the ceiling in a home in your home? See how I updated our basement ceiling with a whitewashed knotty pine wooden plank board. I will just take you by the Diy wooden plank ceiling method move-by-move.
You can also insert comparable character to other areas of your house by adding a wooden plank accent wall or wooden plank wainscoting, a planked kitchen island layout, or a plank headboard wall.
Thanks to DAP for sponsoring this article. All opinions are ours this article may well include affiliate inbound links — see our entire disclosure coverage below.
Diy Whitewashed Wooden Plank Ceiling
This ceiling actually reworked the appear of this home in our home. We appreciate how it turned out. We are thinking of accomplishing this in other rooms in our home but prior to we do that I required to test out how we preferred it in this home in the basement.
We experienced already installed new flooring, so now that we have a new basement ceiling, we just have to do every little thing in between! #youmightbeaRemodelaholic
See the befores of our Jordan home below and all the tasks for this home below.
A number of times
Measurement of Job:
11′ x 14′ (154 sq. toes) ceiling with portion fall down. This home is beneath the key floor of the home in the basement.
Charge and Materials:
Neighborhood components retail outlet costs
- (four) boxes 8′ very long Knotty Pine Wooden V-Plank Boards Kits $fifty four.01/box
- 41 rows at 11′ – 6″
- About 500′ of boards (63 boards, three.five box kits)
- Add 10% far more boards for waist. Half a box worked terrific for me.
- (one) Gal. White Latex Paint $31
- (10) 10 oz. DAP DYNAGRIP Adhesive $four/10 oz.
- (one) box one one/4″ Pin Nails $10/box
- Whole Cost $261
Video Coming Quickly
Continue to be tuned for a video tutorial of this basement ceiling update. Subscribe to our YouTube channel and simply click the bell to transform on the notifications!
Whitewashing and Set up Actions
one. Whitewash Boards Initially.
This will help you save you a large amount of time and headache if you do this to start with. I experienced greater regulate of the colour when I took the time to whitewash the boards prior to I installed them.
Dilute the paint of decision with drinking water. I applied about seventy five% paint to 25% drinking water for this appear. I didn’t want it to be too white so I wiped it off, with a rag, suitable immediately after implementing the paint with a brush. Allow that dry for a pair of several hours then you can get started installing.
Associated Looking at: Use this colour washing method to stain wooden any colour!
two. Thoroughly clean the Area.
Clean the ceiling with a damp rag and some dish soap to get rid of any dirt or dust. This will assistance the boards adhere to the ceiling when you glue them in area.
You’ll also want to get rid of the gentle fixtures to reinstall immediately after your plank ceiling is installed. We took this prospect to swap the flush-mount “boob lights” with can lights and we appreciate the big difference! Additional information about that coming in the video.
Read far more about installing recessed can lights or see our picks for far more trendy flush-mount fixtures below.
three. Mark All the Floor Joists or Ceiling Rafters.
In my situation, I was in the basement underneath the key amount of the home, so I located all the floor joists with a stud finder and chalked a line across the home to establish the heart of each floor joist with a chalk line, so I could nail the boards to the floor joists driving the drywall in the ceiling.
I have noticed and researched other techniques to installing boards on the ceiling, but I decided that just nailing and gluing to the ceiling was the ideal choice for me. Our completed ceiling top with out the new boards was 7′-6″ and I didn’t want to make it too much shorter with other techniques that I noticed.
See how other DIYers have installed a plank ceiling in the kitchen and in the attic, and a reclaimed wooden plank ceiling in a bedroom.
four. Begin to start with row.
Begin on the longest wall in the back of the home, opposite of the doorway. I ran the boards the length of the home, perpendicular to the doorway. Slice the boards as you go with a miter noticed.
Oriented the boards so the the tongue of the boards ended up dealing with the entry of the home. I required to make absolutely sure that from the entry of the home you could not see into the gaps of the tongue and groove of the boards.
I used the DAP DYNAGRIP Adhesive to the back of the board
Then applied the pin nailer to keep it in area on the ceiling while the adhesive dries. I nailed in to the edge of the tongue at and angle, to cover most of the nail heads. Due to the fact I applied a pin nailer most of the holes where so modest it didn’t even mater too much that they where showing.
five. Offset the Ends of the Boards
Offset the ends of the boards at least 4″ from the earlier row. You want to avoid lining up the ends on each row as much as you can. This will give you a nicer staggered appear.
6. Repeat the Process Right until the Ceiling is Concluded
Repeat installing the tongue and groove planks right up until you’ve lined the ceiling. The impending video will contain how to measure and lower close to the holes for your lights, so be absolutely sure to subscribe to our YouTube channel to see that!
For the previous row of boards I ripped the boards to width with a table noticed based mostly on the remaining width I necessary to finish it off. I lower off the tongue conclude of the board. You also have to get rid of 50 percent of the groove up towards the ceiling in purchase to glue this piece in area.
As soon as the previous board is installed then you are finished. We remaining the ceiling with whitewashed flat sheen appear and we appreciate it.
What do you imagine? Allow us know in the responses underneath if a whitewashed knotty pine board ceiling is a thing you would like in your house. Be sure to share and pin for afterwards!
Additional Diy ceiling updates: